Operational Area

.

Delivery-Program

  1. Corrosion Protection Units in Microprocessor-Technology
    1. Potential Controled Rectifier Units
      10 - 600 Ampere DC at 6 - 10 Volt DC
    2. Galvanostatic Rectifier Units
      10 - 600 Ampere DC at 6 - 10 Volt DC
    3. Transducer box for Reference Electrodes
  2. Reference Electrodes
    1. Reference Electrode Type Hg/HgSO4, screw-in thread R1”
    2. Reference Electrode Type Hg/HgO, screw-in thread R1”
    3. Reference Electrode Type Ag/AgCl, screw-in thread R1”
    4. Reference Electrode Type Zink, screw-in thread R1”
    5. Reference Electrode for the flange-installation, reference-elements corresp. 2.1- 2.4
    6. Reference Electrode for the wall-installation, reference-elements corresp. 2.1- 2.4
  3. Anodes
    1. Rod-Anodes, Type Ti/Mio, screw-in thread R1”, in all dimensions
    2. Plate-Anodes, Type Ti/Mio, in all diameters
    3. Strip-Anodes, Type Ti/Mio, in all lengths and strengths
    4. Rod-Anodes, Type Ti/Mio, compl. with cables
    5. Rod-Anodes, Type Ti/Mio, for wall-installation
    6. Anode Chains Type Ti/Mio (until 10 anodes possible)
  4. Cathodes
    1. Tube-Cathodes, Type 316 Ti, in different dimensions
      (lengths and diameters on inquiry)
    2. Rod-Cathodes, Type 316 Ti, screw-in thread R1”
      (lengths and diameters on inquiry)
  5. Corrosion Test assemblies and accessories
    1. Corrosion Bypass piping assemblies in Carbon-steel
    2. Coupon-Holders for Bypass piping assemblies
    3. Corrosions-Coupons, in several materials,
      e.g. Carbon-steel, stanless-steel, brass, copper
    4. Special Test-Samples in several materials
    5. Tube-Tests-Samples in several materials and dimensions
  6. Corrosion-Measurement
    1. Corrosometer-Probes, stationary and retractable
    2. Corrater-Probes, stationary and retractable
    3. Measuring Instruments for Corrosometer-Probes
    4. Measuring Instruments for Corrater-Probes
    5. Transmitter with 4-20mA output for Corrosometer-Probes
    6. Shutoff valve for Corrosometer- and Corrater-Probes
    7. Coupling flange for all types
  7. Insulations
    1. Gasket materials of PTFE and PTFE-Ceramics with 25% glass
    2. Isolation materials of PTFE and PTFE-Ceramics with 25% glass
    3. Isolation hulls of different materials
    4. Isolation tubes of PTFE and PTFE-Ceramics with 25% glass
    5. Holders for Reference-Electrodes material of Polypropylen (PP) or PTFE
    6. Anode-Holders material of Polypropylen (PP) or PTFE

Further accessories on inquiry


.
.

xxnoxx_zaehler